Engine Mechanical (6WG1 (Common rail)) 1B-47 3. Remove the injector harness. 4. Remove the nozzle leak off pipe. 5. Remove the harness connector. 8. Remove the rocker arm ASM. While maintaining the bracket's balance, loosen and remove the tightening bolts from both sides of the rocker arm ASM bracket. Legend 1. Nozzle leak off pipe 2. Harness connector 9. Remove the bridge (1). 6. Remove the head lower cover. 7. Remove the head lower cover gasket. Notes: Install numbered tags to each cylinder in the bridge. Notes: When removing the lower cover, a small amount of oil may spill, so be prepared to clean it with a rag.