1B-48 Engine Mechanical (6WG1 (Common rail)) Inspect the contact surfaces for wear and de- bonding, and the bridge for cracks or damage. While maintaining the bracket's balance, loosen and remove the tightening bolts from both sides of the camshaft bracket. 10. Remove the cam shaft. Before removing the cam shaft, measure the clearances of the camshaft orientations. Measure the clearance between the cam shaft journal and bracket. Camshaft orientation clearance (mm) Clearance between journal and bracket (mm) Standard Limit 0.085 ~ 0.170 0.25 Selection of a reference point Limit 0.065 ~ 0.125 0.15