1B-72 Engine Mechanical (6WG1 (Common rail)) Legend 1. Roller 2. B measurement 3. Callipers 4. A measurement Rocker arm Inspect the roller surface for wear or damage, and measure the clearance between the roller pin and roller. Mark the measurement place when the rocker arm roller is pushed out to its limit, and measure the level difference (A measurement) between the rocker arm and roller. Next, push the roller in to its limit, then measure the level difference (B measurement) at the position of the measurement place mark. The difference between the A measurement and B measurement above is the clearance between the roller pin and roller.
Clearance between roller pin and roller Inspection Rocker arm shaft Inspect the oil pore of the rocker arm shaft Inspect the bend of the rocker arm shaft Shaft bend Limit: 0.3 mm Standard mm Limit mm 0.036 ~ 0.069 0.15