hitachi — Assembly

Engine Mechanical (6WG1 (Common rail)) 1B-73 4. Install the spring. 5. Install the bracket. Install each part in the direction shown in the diagram. Notes: Check the front mark (1) on the rocker arm shaft. Measure the outer diameter of the rocker arm shaft and clearance between shaft and rocker arm bush. (mm) Legend 1. Front mark Assembly 1. Apply a thin layer of oil to the rocker arm shaft. 2. Install the bracket. 3. Apply engine oil to the bush section and roller section, and install the rocker arm. Nominal dimension Standard Limit Clearance between shaft and rocker arm — 0.02 ~ 0.074 0.20 Shaft outer diameter φ28 — φ27.85