hitachi — Inspection

Engine Mechanical (6WG1 (Common rail)) 1B-75 2. Remove the key from the camshaft. Inspect the cam surface for damage, and measure the amount of cam lift. Repair any slight abrasions or wear with an oilstone. Measure A-B, and determine the amount of lift. Inspection Camshaft gear Inspect for damage. Amount of cam lift (A-B) (mm) Camshaft Measure the bend of the camshaft Hold the No.1 and No.7 journal sections with a V block, and use a dial gauge on the No.4 journal to gently turn the camshaft through 1 revolution and measure the camshaft. Amount of camshaft runout (mm) Measure the outer diameter of the journal. Measure in the position shown in the diagram with a micrometer.

Nominal dimension Limit Intake 9.4 8.85 Exhaust 10.4 9.75 Standard Limit 0.08 0.1