Engine Mechanical (6WG1 (Common rail)) 1B-81 Idle gear Measure the spindle diameter and clearance between gear and spindle for each idle gear. Idle gear spindle diameter (mm) Idle gear (A,B,C) and spindle clearance (mm) Disassembly 1. Disassemble the crank pulley ASM. Loosen the installation bolts and remove the damper from the crank pulley. Pin outer diameter of idle A large gear (mm) Inspection 1. Inspect the crank shaft pulley slot for wear or damage. Idle gear Nominal dimension Limit A φ79 φ78.85 φ57 φ56.85 B φ142 φ141.85 C φ49 φ48.85 Standard Limit 0.04 ~ 0.105 0.20 Nominal dimension Limit φ22.2 φ22.0