1B-96 Engine Mechanical (6WG1 (Common rail)) 2. Extract the piston and connecting rod from inside the cylinder. Use a scraper or other such tool to remove carbon from the upper section of the liner. 3. Remove the connecting rod bearing. Notes: Install the cylinder number and store it safely. Notes: When rotating the crankshaft and when extracting the piston, prevent the liner from being extracted too. Disassembly 1. Use a setting tool to remove the piston ring. Notes: Add a distinguishing mark for each piston to each removed piston ring. Setting tool; Piston ring: 1-8522-1025-0 Use the handle of a hammer or other such tool to push the underside of the connecting rod out. Important:
Do not allow the connecting rod or liner to obstruct each other. Be careful not to damage the oil jet. In order to avoid confusion, assemble the removed cap, bearing and connecting rod as a set.