1B-116 Engine Mechanical (6WG1 (Common rail)) Cylinder block Component parts Legend 1. Oil relief valve 2. Cylinder liner 3. Cylinder block 4. Oil pressure sensor 5. Oil jet 6. Crankcase Disassembly 1. Remove the oil pressure unit. 2. Remove the oil relief valve. 3. Remove the crankcase. 4. Remove the oil jet. 5. Remove the cylinder liner. Measuring the cylinder liner inner diameter Inspect the inner surface of the liner for damage or scratches. With the liner inner diameter still installed to the cylinder block, measure the maximum wear section in the position approx. 20 ~ 25 mm from the liner upper surface, and replace the liner if this exceeds the limit.