hitachi — Assembly

1H-16 Lubricating system (6WG1 (Common rail)) 4. Apply engine oil to the driven gear and install it to the pump body. 9. Install the split pin and fix each of the parts. 10. Insert the ball. 11. Install the cover. Oil pump operational checks After completing the re-assembly, rotate the drive gear by hand and check that it operates smoothly. M10: 39 N m {4.0 kgf m} M8: 18 N m {1.8 kgf m} 5. Install the oil pump cover. Tightening torque 6. Apply oil to the oil relief valve and install it. 7. Apply oil to the spring and install it. 8. Apply oil to the spring seat and install it.