hitachi — Disassembly

1J-8 Intake system (6WG1 (Common rail)) 1. Remove the coupling ASM. 3. Unfasten the snap ring (1). Legend 1. Bearing housing 2. Coupling ASM 3. Turbine housing 4. Remove the compressor cover (1) by gently tapping around its circumference with a plastic hammer or similar tool. 2. Remove the turbine housing (1). Caution: Make sure that the compressor wheel doesn't hit the compressor cover. 5. Remove the nut. Hold the turbine housing in a vice, and insert the bearing housing into the turbine housing. Press the shaft & turbine wheel boss with a 17 mm box, and use a 14 mm box to remove the locknut that is fixing the compressor wheel.