1E-88 Electronic control fuel injection system (Common rail type) Engine Control System Description of function and operation About engine control (common rail) system EGR (Exhaust gas recirculation) Idle speed control The engine control system also has the following system control functions other than engine control. QOS (Quick On Start) system Engine speed signal output Self-diagnosis function CAN (Controller Area Network) communication (SAE J1939/21, SAE J1939/11) General and detailed description in engine control system The engine control system is electronic control system which maintains optimum combustion status of engine all the time according to operating conditions.
It consists of the following components. Electronic control fuel injection system (Common rail type) System control schematic diagram (*: Specifications vary depending on each machine.
Refer to the machine’s manual.) Engine control module (ECM) Accelerator position sensor input CAN communication Machine control unit Boost pressure sensor input Basic fuel injection amount CKP sensor input G sensor input Engine coolant temperature correction Barometric Pressure Fuel temperature boost pressure correction Correction between cylinders Q-key correction QR correction Correction ECT sensor input * Correction Vehicle speed sensor input PCV opening time determination Injector coil energizing time Timing determination Common rail pressure sensor Common rail PCV Injector coil Supply pump Injector Fuel tank TSWG0003