Electronic control fuel injection system (Common rail type) 1E-89 About fuel injection correction About high-altitude correction ECM calculates the basic injection amount based on the signals from accelerator position sensor, boost pressure sensor, CKP sensor, G sensor, etc. It regulates the opening/closing period of PCV or electric conduction of injector according to the common rail pressure, engine coolant temperature, etc. at this time, to correct the optimum injection timing and injection amount. ECM calculates the current altitude based on the barometric pressure sensor signal. It corrects the optimum fuel flow according to the altitude etc. at this time.
About starting Q adjust ECM performs starting Q adjust when the engine speed is less than the starting Q threshold value at engine starting. Also, ECM cannot perform starting Q adjust or start the engine when the engine speed is less than the lowest speed that system can recognize, since it does not recognize engine rotation. Fuel flow limit (mm /st) 3 Engine speed (rpm) Barometric pressure kPa(psi) highland TSWG0173 550 Starting Q threshold enginespeed 60 Minimum firing engine speed 30 System realization engine speed TSWG0175