1E-92 Electronic control fuel injection system (Common rail type) Fuel system Fuel is supplied from fuel tank to supply pump, then supplied to common rail after pressurized by the pump. At this time, the system operates the pressure control valve (PCV) by the signal from ECM to control fuel amount supplied to common rail. TSWG0143 Name 1. Common rail 2. Fuel filter 3. Injector 4. Fuel tank 5. Pre-filter 6. Feed pump 7. Supply pump EGR (Exhaust gas recirculation) Exhaust Gas Recirculation system is abbreviated to EGR system. It recirculates part of exhaust gas into intake manifold to mix an inert gas with intake air.
This leads to lower the combustion temperature to limit emissions of nitrogen oxide (NOx). It controls amount of EGR by opening/closing the EGR valve installed between exhaust manifold and intake manifold. It determines amount of EGR, based on the engine speed and load rate on engine (fuel injection amount), and operates the EGR valve to control the amount of EGR. The cooling system (EGR cooler) equipped on the EGR gas passage allows to cool down high temperature EGR gas and mix it with new air to lower the combustion temperature further, resulting in limiting NOx effectively (Cooled EGR).
On 6WG1-TC machine, the EGR system has the check valve to stop backward flow of EGR gas and flows it in one way direction, leading to increase the amount of EGR.