Electronic control fuel injection system (Common rail type) 1E-91 Control during overheat In overheating, ECM begins to limit fuel flow when the engine coolant temperature exceeds 108 ° C (226 ° F), for engine protection. It limits fuel flow further as the engine coolant temperature goes up. Fuel flow is limited to a certain level at around 120 ° C (248 ° F). The system raises an alarm from 105 ° C (221 ° F) for some machines. In addition to alarm, by reducing the load to the machine, it enables to avoid such conditions that the fuel flow is limited.
100% (226 ) Fuel fiow (248 ) Engine coolant temperature (221 ) TSWG0169 System schematic diagram Common rail pressure sensor Common rail Pressure limiter Fuel filter Fuel filter Flow damper Supply pump Injector E C M Fuel tank Each sensor Accelerator, Boost pressure, Engine coolant temperature, etc. CKP sensor TSWG0142