TRANSPORTING THE MACHINE ON OTHER VEHICLES 1 - The machine with empty bucket or without optional accessories must get on the ramps with the bucket (1) at the back and raised from the ground. 2 - Once the machine has been loaded, lower the work equipment to the ground and shift the safety bars to the lock position. 3 - Apply the parking brake. 4 - Stop the engine and remove the ignition key. 5 - Keep the machine in position by putting wedges (2) before and behind the wheels. 6 - Fix the machine with tie-downs or chains (3) in the anchorage points (5) and (6). 7 - Protect the end of the exhaust pipe (4). 3 1 3 2 2 4 Max.
15˚ RWA37460 3.9.2 TRANSPORT 1 - Check the overall dimensions of the means of transport: the height, width and weight of the vehicle - machine included - must be compatible with the road and any tunnel, underpass, bridge, electric or telephone line that may be found on the way. 2 - Keep to the regulations in force regarding signals, speed limits, road traffic, authorizations, etc. 125