Komatsu — 3.10 HOW TO LIFT THE MACHINE

HOW TO LIFT THE MACHINE 3.10 HOW TO LIFT THE MACHINE q To lift the machine use sufficiently dimensioned cables; do not use worn cables or cables with broken strands. q Do not lift the machine with the operator on board and make sure that no one is approaching the machi- ne before lifting it. q Before lifting the machine, make sure that the eye bolts are correctly fixed to the cab roof. IMPORTANT q The owner of the machine is responsible for installing the eyebolts correctly on the cab roof. q Use only eyebolts homologated by Komatsu for this specific type of machine. q Homologated eyebolts must be requested to Komatsu Spare Parts Dpt., specifying the machine model and se- rial number.

To lift the machine, proceed as follows: 1 - Lower the loader arm to the ground and fold the bucket completely. RWA37470 2 - Shift the safety bars to the lock position and stop the engi- ne. 3 - Insert metal or nylon ropes in the four eye bolts on the cab roof and fix with the appropriate retainers or safety pins. 4 - Connect the ropes to the upper lifting bar as indicated in the figure. IMPORTANT q Always use the four coupling points provided for the lift- ing of the machine. 5 - Lift slowly until the ropes are tensioned and make sure that the machine is fastened correctly before lifting it.

q When lifting the machine, make sure that it is correctly balanced and that it can be lifted horizontally. q Do not lift the machine with optional equipment installed on it. 126 DANGER CAUTION