Komatsu — 4.8.1.c DRAINING THE FUEL TANK

MAINTENANCE PROCEDURE 4.8.1.c DRAINING THE FUEL TANK q When draining the fuel tank, avoid spilling fuel, since this may cause fires. q If some fuel is accidentally spilled, clean the dirty area immediately, in order to prevent it from getting slippery and to avoid fires. This operation serves to let all the impurities and the conden- sate flow out of the tank. Proceed as follows: 1 - Raise the engine hood (see "3.5.1 ENGINE HOOD"). 2 - Lift the loader arm completely and engage the safety lock (see "3.1.1 LOADER LOCKS"). 3 - Rotate the lever (1) anticlockwise, until only clean fuel flows out of the pipe connected to the drain cock of the tank.

4 - Rotate the lever clockwise (1) to interrupt the fuel flow and close the engine hood. IMPORTANT q The tank must be drained before starting the engine, with temperatures exceeding 0єC; when the temperature is below 0єC, the tank must be drained at the end of work or in any case with the machine at operating tem- perature, to prevent the condensate from freezing. q The condensate and the impurities that may have accu- mulated inside the tank must be eliminated before re- fuelling. 175 WARNING