MAN — Fuel prefilter

Fuel prefilter Cleaning fuel prefilter D Shut cut-off valve from fuel tank to engine. Fig. 1 Remove round nut and take off filter housing with sieve. Use a bowl to catch fuel that may emerge. 1 4304 Fig. 2 Wash out filter housing and gauze filter in clean Diesel fuel and blow them out with compressed air. Reassemble fuel prefilter using new seal. 2 4305 Fig. 3 Actuate plunger of hand priming pump until the overflow valve of the injection pump opens audibly. Check fuel pre-filter for leaks while engine is run- ning. Note:

When bleeding the fuel system switch on the electromagnetic shut-off valve (EHAB) without fail (ignition on), as otherwise fuel cannot reach the injection pump suction gallery / suction chamber. Wiring diagram see page 120. 3 4303 36