Fuel filter Changing fuel filter cartridge 3 Fig. 1 1 Disposable filter 2 Screw plug 3 Bleed screw 2 3 1 3 3590 Bild 2 Use tape wrench to loosen filter cartridge and re- move cartridge by hand. Fit a new seal. Lightly coat seal on the filter cartridge with fuel. Screw on filter cartridge and firmly tighten it by hand. 2 4306 Bleeding fuel system Fig. 3 Open bleed screws at fuel filter. 3 4307 Fig. 4 Actuate hand priming pump until bubble-free fuel emerges. Close bleed screws. Check system for leaks. Note:
When bleeding the fuel system switch on the electromagnetic shut-off valve (EHAB) without fail (ignition on), as otherwise fuel cannot reach the injection pump suction gallery / suction chamber. Wiring diagram see page 120. 4 4303 37