MAN — Repairing water pump

Repairing water pump Disassembling water pump The following special tools are required for disas- sembling and assembling the water pump: D Press D Improvised tools, see page 133. Fig. 1 Remove V-belt pulley. Pull off water pump hub with a stable three-arm puller. 1 3433 Fig. 2 Unclip the circlip from the water-pump housing. 2 3434 Fig. 3 Press impeller off the shaft, using a suitable man- drel. For this purpose align water-pump housing horizontally on a stable support. The picture shows an assembly device for this. If such a device is not available, use a support ring (special tool, see page 133). Use a suitable mandrel to press the water-pump shaft together with bearing out of the housing.

Shaft and bearing are encapsulated and ex- changed together only. 3 3583 6 Fig. 4 Water pump disassembled 1 Hub 2 Circlip 3 Pump bearing 4 Housing 5 Axial face seal 6 Impeller 4 5 1 2 3 4 3380 43