MAN — Assembling water pump

Repairing water pump Assembling water pump Fig. 5 Press in water pump bearing. Use hollow mandrel to press on the outer bearing ring and not on the bearing shaft. For this purpose align water-pump housing hori- zontally on a stable support. 5 3437 Fig. 6 Refit circlip. 6 3435 Fig. 7 Press in new mechanical seal with press-fitting sleeve (special tool see page 126, item 11) until it stops. Observe installation note for seal on page 46. Note: The seal can be exchanged even without removing the water pump shaft. 7 3438 44