MAN — Removing and installing flywheel, replacing gear ring

Removing and installing flywheel, replacing gear ring Removing flywheel D Remove speed pickup, see page 119 Fig. 1 Loosen mounting bolts, securing the engine against turning if necessary. 1 4341 Fig. 2 Remove two bolts facing each other and replace them by two guide pins (special tool, see page 126, item 16). Remove all bolts. Pull off flywheel, using a lifting gear. Danger: The flywheel is heavy. Use lifting gear. 2 3675 Installing flywheel Fig. 3 Screw in guide mandrels (special tool, see page 126, item 16). Apply sealing agent ”Antipor 46” to the inside of the flywheel.

Place guide mandrels on the flywheel, ensuring that the centering mandrel (arrow) fits correctly into the bore in the flywheel. Push on flywheel until it stops. 3 3676 Fig. 4 Lightly oil new mounting bolts (elasticated bolts) , screw them in and tighten alternately on opposite sides of the ring gear to specified torque (see ”Engineering S Data S Setting values”). 4 4342 58