MAN — Removing and installing turbocharger

Removing and installing turbocharger Fig. 5 Remove the four (self-locking) nuts from the turbo- charger flange. 5 4378 Fig. 6 Take off turbocharger. Note: Ensure meticulous cleanliness when put- ting the turbocharger aside to prevent dirt and foreign matter from penetrating into the interior of the turbocharger. 6 4379 Installing turbocharger Figs. 7 and 8 The turbocharger is assembled in reverse order. When assembling, use new seals and new self− locking nuts. Before connecting up the oil supply line, fill bearing housing up with clean engine oil. Check all connections for leaks and tension. Caution: Comply with instructions for masking unions on pressurised oil and fuel pipes (see page 3).

7 4377 7 4380 72