MAN — Checking valve timing

Ventilsteuerzeiten kontrollieren Note: If the valve timing is incorrect, serious damage to the engine may result. For this reason, if faults occur in the engine which could lead to the shrunk-fitted camshaft gear turning, check that the gear is cor- rectly seated by checking the valve timing. Carrying out a check after installation of the camshaft is also recommended. Fig. 1 Remove cylinder head cover from 1st cylinder. Carefully set exhaust valve for 1st cylinder. 1 3608 Fig. 2 Turn engine until the valves of the 1st cylinder are in crossover. Turn engine back to approx. 50 _ before TDC, then forwards to 30 _ before TDC (observe graduation on flywheel). Fig.

3 Apply dial gauge with approx 2 mm preload to valve spring retainer of exhaust valve in 1st cylin- der and set to “0”. 2 4287 Turn engine in running direction through 180 _ (exhaust valve fully closed). Read valve stroke from dial gauge. The valve stroke must be between 5,5 and 6,5 mm. 3 2880 96