HYDRAULIC QUICK CHANGE COUPLER (SWH) a coupler b locking pins (extended) c attachment hook for tool d stop g load hook 3 right joystick 4 left joystick with push-buttons left / right 1 S47 push-button quick change coupler (S47 was a key switch up to approx. 12-2004) S19 push button for grapple rotation drive symbol locking pins inserted on the screen TECHNICAL DATA Maximum operating pressure 100 bar. PUSH BUTTON S19 (fig. 3) The hydraulic additional attachment function "rotating device" is actuated via push button S19 (indicator light in the button lights up). 2 SYMBOL Locking pins inserted (fig.
3) If this symbol appears on the screen, the pins are retracted (tool unlocked) DANGER The working tool is only connected to the attachment hook of the quick change coupler 3 PUSH-BUTTON SWITCH S47 (fig. 4) POSITION "0" In zero position the locking pins of the quick change coupler SWH cannot be actuated. POSITION "I" The locking pins can be actuated if push button S19 is on and if at the same time the switch S47 is maintained in position "I", this means: - with the key switch S47: turn the key clockwise to position " I " and then depress and keep the key depressed. - with the push button S47: press down and hold the button depressed. 4 8. 2.3