CONTROLS AND INSTRUMENTATION FOR OPTIONAL EQUIPMENTS Right side control desk H40 Control light / Pre-selection hydraulic circuit H90 Control light / Rotation in opposite direction of reversible fan H292 Control light / Special control system S26 Touch / Fuel preheater S40 Touch / Frequency commutation for hydraulic hammer S46 Touch / Lifting magnet S47 Key switch or touch / Quick disconnecting device S53 Touch / Special control circuit S54 Key switch / Unlocking of hydraulic cylinder end position S74 Code key / Start locking device S76 Touch / Travel brakes S77 Touch / Pressurized driver's cab S79 Touch / Flow divider for special attachment S84 Push button / Centralized lubrication S98 Touch / Low pressure protection for boom cylinders S104 Touch / Width adjustable undercarriage S114 Rotating switch / Control of special attachments with the rocker switch S55 on joystick S117 Rotating switch / Pre-selection hydraulic circuit S160 Push button / Control of reversible fan in opposite direction S168 Key switch / Oil flow limitation when operating a super long working attachment S210 Push button / Cold start aid S218 Touch / Cab roof window wiper S247 Key switch / Commutation of control system Normalized control / Special control S275 Touch / Additional floodlight rear of cab roof S276 Touch / Additional floodlight on counterweight S357 Touch / Boom height compensation during grapple closing motion S358 Push button / Cab roof window washer Left side control desk S78 Push button / Height adjustable cab - emergency down S80 Push button / Height adjustable cab - locking device on / off S200 Push button / Height adjustable cab - up S201 Push button / Height adjustable cab - down S232 Control unit S232 / Standstill cab heater * The location of these controls may differ, depending on the type of the other installed optional equipments..
3.19