CONTROL OF BOOM CYLINDER (right joystick 3 - fig.57) Push joystick 3 forward (g) to lower the attachment (fig.58). Pull joystick 3 backward (h) to lift the attachment. CONTROL OF THE BUCKET OR GRAPPLE CYLINDER (right joystick 3 - fig. 57) Push joystick 3) to the left (e) to tilt the bucket in or close the grapple (fig. 58). 57 Push joystick 3 to the right (f) to tilt the bucket out or open the grapple. DANGER Never allow anybody to guide the grapple by hand ! CONTROL OF A SPECIAL EQUIPMENT (TELESCOPIC STICK, PULLING DEVICE, ... ) The control of special equipments such as telescopic stick (fig. 59A), pulling device (fig. 59B), hydraulic adjustable boom, ...
is achieved using the two pedals, 7c and 7d (fig. 61). 58 For special equipments with two hydraulic cylinders, the second cylinder is controlled via the pedals 7a and 7b (fig.61) of the right pilot control. If in case of an additional equipment having several hydraulic users, the right pedals 7a and 7b are used to control two different movements, the commutation from one movement into the other is obtained while tilting the rocker switch S55 in the left joystick handle. CAUTION Auxiliary control units can have various functions. Always check their functions when starting up the machine.
Depending on the function and on the type of the special tool, it may be necessary, before attempting to control the special equipment, to confirm the corresponding choice of pump parameters, using the menu "Set Option" of the display. 59 60 4.15