CONTROL OF HYDRAULIC HAMMER (optional equipment) The hydraulic hammer is actuated via the pedal 7d of the left pilot control (fig. 61). Notice: The operation of a hydraulic hammer requires the previous setting of the correct option which have been allocated to use of this hammer, using the menu "Set Option" of the display (fig. 62). Normally the designation appearing in the lower right corner of the screen must correspond to the definition of the installed hammer. 61 In case of a doubt, contact your supervisor to obtain this information. CAUTION The choice of the option in the menu "set option" determines pressure and oil flow adjustment in the hydraulic circuit.
A wrong choice of the option could lead to damage or unsatisfactory operation of the additional equipment. The choice of the option does neither have an influence upon the allocation of the pedals, nor lead, to a switching- off of the pedal function. 62 For operation with a hydraulic hammer: The hydraulic hammer must be selected with particular care. When using a hydraulic hammer not permitted by LIEBHERR, steel structures or the other machine components can become damaged. Before beginning breaking tasks, position the machine on firm and level ground.. Use a hydraulic hammer designed exclusively for breaking stone, concrete and other breakable materials.
Only operate the hydraulic hammer in the longitudinal direction of the machine and with the windshield closed or with a front protective grid. Ensure during hammer operation that no cylinder is entirely extended or retracted and that the stick is not in the vertical position. 63 In order to avoid damages to the machine, try not to break stone or concrete while performing retraction and extension motions of the hydraulic hammer. Do not apply the hydraulic hammer uninterrupted for more than 15 secs. at a time to the same place. Change the breaking point. Too long uninterrupted operation of the hydraulic hammer leads to an unnecessary overheating of the hydraulic oil.
Do not use the drop force of the hydraulic hammer to break stone or other materials. Do not move obstacles with the hydraulic hammer. Misuse of this nature would damage both the hammer and the machine. 64 Do not use the hydraulic hammer to lift objects. 4.16