6-44 Item Description Service action Bucket leveler (positioner) check Run engine at low idle. Position bucket fully dumped just above ground level. Move control lever to bucket leveler detent position and release. LOOK : Bucket must rollback to the level position and control lever must return to neutral. If bucket is in a rolled back position when key is turned ON, control lever must be returned to neutral manually if placed in the bucket leveler detent position. After bucket is dumped once, bucket leveler will work normally. OK Check complete. NOT OK Do bucket leveler checks. Boom height kickout check Run engine at low idle. Position bucket flat on ground.
Move control lever to boom raise detent position and release. LOOK : Boom must raise to the set height and stop. Control lever must return to neutral. OK Check complete. NOT OK Do boom height kickout check. Cycle time check Heat hydraulic oil to operating temperature. Run engine at high idle. Function Operating condition. Boom raise Bucket flat on ground to full height. Boom lower Full height to level ground. Bucket dump Boom at full height. Bucket rollback Boom at full height. Steering [No. of Frame stop to frame stop. turns] Maximum cycle time 5.9sec 3.1sec 1.3sec 1.9sec 3.8 turns OK Check complete. NOT OK Go to slow hydraulic functions in group 2.