Kaiyi — Kaiyi Hydraulic Systems Maintenance Manual

2. BOOM HEIGHT KICKOUT ADJUSTMENT 2. BOOM HEIGHT KICKOUT ADJUSTMENT The bucket can be adjusted to a height desired by using the boom kick-out device. Park the machine on level ground and Park the machine on level ground and block the tires to prevent sudden block the tires to prevent sudden movement of the machine. movement of the machine. Press the parking brake switch. Press the parking brake switch. Fix the front and rear frames by using the Fix the front and rear frames by using the safety lock bar. safety lock bar. Do not work underneath the work Do not work underneath the work equipment. equipment.

1) ADJUSTMENT OF THE BOOM KICKOUT AND ADJUSTMENT OF THE BOOM KICKOUT AND BUCKET LEVELER BUCKET LEVELER (1) Lift kickout position Lift kickout position To set the lift kickout, raise the bucket to the desired position above the midway point. Then push icon ( , A) for 2~3 seconds. The boom will return to the programmed position when the raise detent is activated and the boom is below the kickout position. Detent setting switch A B (2 (2) Lower kickout position Lower kickout position To set the lower kickout, lower the bucket to the desired position below the midway point. Then push icon ( , A) for 2~3 seconds.

The boom will return to the programmed position when the float detent is activated and the boom is at least a foot above the kickout position. Bucket pivot pin Boom pivot pin Midway point (3 (3) Bucket leveler position Bucket leveler position To set the bucket leveler, roll back the bucket to the desired position. Then push icon ( , B) for 2~3 seconds. The bucket will return to the programmed position when the roll back detent is activated and the bucket is below the leveler position. Neutral Detent position 760F4OP28 6-53