SEBU8726-03 67 Maintenance Section Refill Capacities Maintenance Section (Table 6, contd) (1) The External System includes a radiator or an expansion tank with the following components: heat exchanger and piping. Re- fer to the OEM specifications. Enter the value for the capacity of the External System in this row. Refill Capacities i04794766 Refill Capacities i05344256 Fluid Recommendations Lubrication System General Lubricant Information Because of government regulations regarding the certification of exhaust emissions from the engine, the lubricant recommendations must be followed.
The refill capacities for the engine crankcase reflect the approximate capacity of the crankcase or sump plus standard oil filters. Auxiliary oil filter systems will require additional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter. Refer to the Operation and Maintenance Manual, “Maintenance Section” for more information on Lubricant Specifications. API American Petroleum Institute SAE Society Of Automotive Engineers Inc. ACEA Association des Constructers European Automobiles.
Table 5 ECF-3 Engine Crankcase Fluid Licensing The Engine Oil Licensing and Certification System by the American Petroleum Institute (API) and the Association des Constructers European Automobilesand (ACRA) is recognized by Perkins. For detailed information about this system, see the latest edition of the “API publication No. 1509”. Engine oils that bear the API symbol are authorized by API. (1) These values are the approximate capacities for the crankcase oil sump (aluminum) which includes the standard factory in- stalled oil filters. Engines with auxiliary oil filters will require ad- ditional oil. Refer to the OEM specifications for the capacity of the auxiliary oil filter.
The design of the oil pan can change the oil capacity of the oil pan. Cooling System Refer to the OEM specifications for the External System capacity. This capacity information will be needed in order to determine the amount of coolant/ antifreeze that is required for the Total Cooling System. Table 6 Illustration 41 g01987816 Typical API symbol (continued) Engine Refill Capacities Compartment or System Minimum Maximum Crankcase Oil Sump(1) 6 L (1.6 US gal) 8.5 L (2.2 US gal) Engine Refill Capacities Compartment or System Liters Engine Only 6 L (1.6 US gal) External System Per OEM(1)