84 SEBU8726-03 Maintenance Section Severe Service Application 7. Use standard welding practices to weld the materials. dusty, unless the equipment is cleaned regularly. Mud, dirt, and dust can encase components. Maintenance can be difficult. The buildup can contain corrosive chemicals. i04150276 Severe Service Application Buildup – Compounds, elements, corrosive chemicals, and salt can damage some components. Severe service is the application of an engine that exceeds the current published standards for that engine. Perkins maintains standards for the following engine parameters:
Altitude – Problems can arise when the engine is operated at altitudes that are higher than the intended settings for that application. Necessary adjustments should be made.
Performance such as power range, speed range, and fuel consumption Incorrect Operating Procedures Fuel quality Extended operation at low idle Operational Altitude Frequent hot shutdowns Maintenance intervals Operating at excessive loads Oil selection and maintenance Operating at excessive speeds Coolant type and maintenance Operating outside the intended application Environmental qualities Incorrect Maintenance Procedures Installation Extending the maintenance intervals The temperature of the fluid in the engine Failure to use recommended fuel, lubricants, and coolant/antifreeze Refer to the standards for the engine or consult your Perkins dealer or your Perkins distributor in order to determine if the engine is operating within the defined parameters.
Severe service operation can accelerate component wear. Engines that operate under severe conditions may need more frequent maintenance intervals in order to ensure maximum reliability and retention of full service life. Due to individual applications, it is not possible to identify all of the factors which can contribute to severe service operation. Consult your Perkins dealer or your Perkins distributor for the unique maintenance that is necessary for the engine. The operating environment, incorrect operating procedures, and incorrect maintenance procedures can be factors which contribute to a severe service application.
Environmental Factors Ambient temperatures – The engine may be exposed to extended operation in cold environments or hot environments. Valve components can be damaged by carbon buildup if the engine is frequently started and stopped in cold temperatures. Hot intake air reduces engine performance. Quality of the air – The engine may be exposed to extended operation in an environment that is dirty or