Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING after the engine is stopped and may cause serious burns. Wait for the oil 3. Fully insert dipstick (G) into filler pipe, then remove it. higher than H, remove cover (1) in the 3 - 93 Parts temperature to go down befor e performing this o 1. Open the engine side c over on the left s ide of the chassis 2. Remove dipstick (G) a nd wipe the oil off 4. The oil le vel shoul d be between H and L marks on dipstick (G). If the oil l evel is b elow L mark, add oil thr ough oil filler port (F). 5. When th e oil leve l is h underpar t of the t ruck. 6. Take the end of h ose ( 2) out of the insp ection window. 7.

Loosen d rain plug (P), drain excess oil a nd check the oil l evel again. 8. If the oil l evel is c orrect , tighten the oil fil ler cap securely a nd close the engine side cov