Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION (C) Adjust reclining angle Pull lever (4) up, set the backrest to the desired position, then release the lever. 3 - 105 AIR SUSPENS (A) Fore-and Pull lever (1) , set the seat to a position where it is easy to operate, then release Fore-aft adju stment: 160 mm (6.3 in) (8 (B) Weight a nd height adjustment of se at atically and in stepless by The seat height is adjusted pneum by fully press that weig height ca when indi ing down or pulling up leve r (2). Adjust the weight so ht indicator (3) will be in t he green range. The n be adjusted by moving l cator (3) is in the green ran Turn the knob clockwise to raise th countercl ockwise to lower the seat.

Height adjus tment range: stepless, 75 Weight adju stment range: 50 to 150 kg REMARK When the s eat is pushed forward, the available reclining angle eater; when the seat is pushed back, the available angle becomes gr ushed back, the available reclining an gle becomes smaller. Wh en moving the backrest, return the ba ckrest to its original positio n before moving the seat. (D) Adjustin g direction of seat Pull up lever (5) to unlock the seat. The seat can then be turned 15 deg. to the r ight. After changi ng the direction of the seat, return the lever securely to lock the sea t. he direction of the seat to the right for the ease of of the ripper. Change t operation