Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION SEAT BELT WARNING brake pedal fully, and adjust the tether belt (1). Tense (4) connected to wind-in clicks. The belt is pulled (2) until it is fitted to your under this condition and cannot belt to your abdomen without then repeat the above procedure from the start. 3 - 106 Before fastening the seat belt, insp ect the securing brackets and belt for Replace any worn or damaged seat Even if there are no signs of damag e, replace belts in accordance with the 5 years after the date of seat belt m anufacture, or every 3 years after the start of actual usage, w Adjust and fasten the seat belt bef ore operating the machine. rating the machine. hout twisting.

Always use the seat belt when ope Fi t the seat belt across your lap wit REMARK The date of seat belt manufacture attached to the seat belt is the start of the 5-year perio d. It is not the start of the 3-year period of actual usage. FASTENING AND REMOVING SEAT B 1. 2. 3. 4. 1. Sit on the seat, depress the b seat so that your back is pres 2. After adjusting the seat positi the tether belt and install it wh seat. Sit on the seat and hold to 3. mechanism (2) and pull out th cover your abdomen sufficien 4. Insert tongue (4) in buckle (3) back into wind-in mechanis abdomen. The belt is locked be extended anymore. Fit th twisting it. REMARK If th e belt is locked before the ton it 5. 6. 5.

Pull the belt to check that it is securely locked in position. s the red button on buckle (3). act. securing the belt to the chassis are not loose. Tighten them if they are loose. (2.5 ± 0.5 kgm, 18.1 ± 3.6 lbft) 6. When removing the belt, pres The belt will automatically retr Check that the bolts of the clamp securing the belt to the chassis are not loose. Tighten t Tightening torque: 24.5 ± 4.9 Nm If th e seat belt is scratched or fray ed, if any fittings are broken or deformed from long serv ice, replace the seat belt immediately.