. OPERATION OPERATION ADJUST MIRROR WARNING ADJUST STEERING, FORWARD-REVERSE, GEAR SHIFT LEVER WARNING position until a click is heard. and release it. Lock lever (1) 3 - 107 Be s ure to adjust the mirrors before starting work. If they are not adjusted properly , you cannot se cure the visibility and may be injured or may injure someone serio usly. Loosen nut (1) of the mirror an d adjust the mirror to a position m the operator's seat. where it gives the best view fro In p articular, be sure to adjust th e mirror so that people at the rear left or right of the machine can b e seen clearly.
Afte r moving case (2) in order to adj ust the position of the steering, forward-reverse , gear shift lever , secure lock lever (1) i nto the notched hole, making sure it is in th e LOCK position. If it is not completely locked, the steering, for ward-reverse, gear shi ft lever may unexpectedly move and cause damage, serious injury, or death. The steering, forward-reverse, a nd gear shift lever can be adjusted by 90 m m (3.5 in) in 9 stages to the front o r rear. Adjust to the most suitable posit ion to match the adjustment of the operator's seat. 1. Pull up lock lever (1) to the F REE position (F) at the rear of case (2) on left side of the operat or's compartment.
, use your other hand to grip the 2. With lock lever (1) pulled up front of case (2), then move he it forward with your left and right hands. The steering, forwar with case (2). d-reverse, gear shift lever moves 3. Move case (2) to the desir Then pull up lock lever (1 automatically returns to LOC REMARK system PCCS: Palm command control Your machine may not be machinery, depending on your equipped with this adjustment machine's specifications.