. OPERATION OPERATION ADJUSTING TILT FOR USING BLADE IN ANGLED POSTURE Angledozers only 3. Angle the blade. PARKING MACHINE WARNING 1. Depress brake pedal (1) to stop the machine. depressing the brake pedal, usually depress decelerator pedal (2) to reduce the engine speed and machine travel speed. 2. Set steering, forward-reverse, gear shift lever (3) to the N position. 3 - 149 Perform the following adjustm ent to adjust the brace length properly. 1. Return the blade to the sta ndard posture (non-angled posture). 2. Adjust the blade to the ne Avoid stopping suddenly. Give yourself ample room when stopping. When stopping the machine dangerous places.
If it is unavo , select flat hard ground and avoid idably necessary to park the machine on a slope, place the parking bra blocks underneath the track s ke lever (4) in LOCK position and insert hoes. As an additional safety measure, thrust the blade into the groun If the work equipment control d. lever is touched by accident, the work equipment may suddenly move , and may cause damage, serious injury, or death. Before leaving the operator's seat, always secure work CK position. equipment lock lever (7) in LO NOTICE If the brake pedal is depressed w speed is high, the brake disc m hen the engine speed or machine travel ay produce a slipping sound. When