. OPERATION OPERATION WARNING (I) (J) Left angle: 25 deg. Right angle: 25 deg. 1. Raise the blade up to the height of 400 mm to 500 mm (15.8 in to 19.7 in) above the ground, and put block (B) beneath the blade edge. 2. Remove pins (1) on the left and right sides, then remove arm (2) from the frame. 3. Insert arm (2) into any desired bracket (C) on the frame (3 brackets provided on one side) and fasten it with pin (1) so that it does not slip off. 3 - 148 METHOD OF ANGLING BLADE (Angle dozer) When dozing toward one side only , operate with angled blade. Whe adjustin amount of angling, it is the work equipment i s m oved by mistake.
S et the work e quipment in a safe condition, then stop the e ngine and lock the work equipmen t securely with the work e quipment lock l ever. Be c areful whe n removin g arm (2). After arm (2) is removed, the blade can move freely