Komatsu — PRECAUTIONS WHEN REMOVING WORK EQUIPMENT

. OPERATION TRANSPORTATION TRANSPORTATION TRANSPORTATION MEANS 3 - 156 When t ransporting the m achine, obse rve all related la ws and r egulations, an d be careful to assure When t ransporting the m achine, choo se the transporta tionmethod i n reference to the weight and dime nsions shown in "SPECIFICATIONS ( PAGE 5-2)".

Note th at the machine s pecifications ( weight and dime nsions) vary depending on the kind of track sh oes, blade, or other e PRECAUTIONS WHEN REMOVING WORK EQUIPMENT If t here is any pressure r emaining in th e tilt piping after the wor k equipment ha s been removed, it ma y be difficult to remove the q uick c oupl er of the tilt ho se, so remove t he work equipment as f 1. Lower the blade to the ground and set it horizontal to the ground surface. REMARK If the blade is tiled, the tilt piping will be under internal pressure, so set the blade horizontal to the ground. 2. Remove the quick coupler (1), then remove the work equipment assembly. .

Lo wer th e bla urface REMAR If t he bl ade is tiled, the ti lt piping will b e under internal pressure se t the blade horizontal to the ground . Remove right a nd le ft trunnions (2 (D65PX,D65W X) REMAR For D65P X and D65WX, remove r ight and left trun nions (2 For D65E X, righ t and left trunnions do not need to sinc e widt h (A) including them is le ss than 3.0 m. . Tie the til t hose with a band to pre vent it from bein