. OPERATION TROUBLESHOOTING PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING When connecting the cables, never contact the positive (+) and negative (-) terminals. When starting the engine with a booster cable, wear safety glasses and the booster cable connections. 3 - 170 STARTING ENGINE WITH BOO When starting the engine with a boo rubb Be c each coul er gloves. areful not to let the normal mach other. This prevents sparks from d ignite the hydrogen gas given Make sure that there is no mistake i The f inal connection is to the engine spar ks will be generated when this is as p ossible from the battery.
Whe n disconnecting the booster cab in co ntact with each other or with the NOTICE starting system for this machine uses 24V. For the normal machine, also use a 24V battery. size of the booster cable and clip should be suitable for the battery size. battery of the normal machine must be the same capacity as that of the engine to be started. k the cables and clips for damage or corrosion. sure that the cables and clips are firmly connected. The starting system for this machine uses 24V. For the normal machine, also use a 24V battery. The size of the booster cable and clip should be suitable for the battery size.
The battery of the normal machine m ust be the same capacity as that of the engine to be starte Chec k the cables and clips for damag Make sure that the cables and clips a Chec k that the work equipment lock l evers and parking brake levers of both machine are in the LOCK position. Chec k that each lever is in the NEUT RAL position. CONNECTING THE BOOSTER CABL E al machine and failed machine in OFF position. s, in the order of the numbers marked in the figure. (A) to the positive (+) terminal hine. nd of booster cable (A) to the D) on the normal machine. (B) to the negative (-) terminal chine. of booster cable (B) to engine ne.
Keep t he starting switch of the norm al machine and failed machine in Conne ct the booster cable as follow s, in the order of the numbers marked in the figure. 1. Connect the clip of booster cable of battery (C) on the failed mac 2. Connect the clip at the other e positive (+) terminal of battery ( 3. Connect the clip of booster cable of battery (D) on the normal ma 4. Connect the clip at the other end block (E) on the problem machi 1. Co nnect the clip of booster cable battery (C) on the failed mac 2. Co nnect the clip at the other e sitive (+) terminal of battery ( 3. Co nnect the clip of booster cable battery (D) on the normal ma 4.
Co nnect the clip at the other end ck (E) on the problem machi