Komatsu — IF BATTERY IS DISCHARGED

. OPERATION TROUBLESHOOTING STARTING ENGINE WARNING 3 - 171 Always check that t he wor k equipme nt lock le ver is set to LOCK posit ion, regardles s of whether the machine i s working n ormally or has failed. Chec k also that all th e control levers are in HOLD or N EUTRAL position. 1. Make sure th e clips are firm ly connected to t he battery te rminals 2. Start engine o f the normal m achine and run i t at high idle speed. 3. Turn the start ing switch of t he failed machine to START p osition and star t the en gine. If the engine doesn 't start at first, try again af ter 2 minute s or so.

DISCONNECTING THE BOOSTER CABL After t he engine h as started , disconnect the boost er cables in t he reverse o f the order in which they were connected. 1. Remove the c lip of booster cable (B ) from en gine block (E th e problem m achine. 2. Remove the clip o f booste terminal of ba ttery ( D) on th e norma l machin 3. Remove the clip o f booste r cable (A) from terminal of ba ttery ( D) on th e norma l machin 4. Remove the clip o f booste r cable (A) from terminal of ba ttery ( C) on th e failed machine.