Komatsu — GUIDE TO MAINTENANCE

. MAINTENANCE GUIDE TO MAINTENANCE CHECK SERVICE METER: Check the service meter reading every day to see if the time has come for any necessary maintenance to be performed. use the Komatsu genuine lubricants. Moreover use oil of the specified viscosity 4 - 2 GUIDE TO MAINTEN Do not pe rform any inspection a nd maintenance opera tion that is not foun KOMATSU GENUINE REPLACEMENT PARTS: Use Koma tsu genuine parts spe cified in the Parts Book as replacement p KOMATSU GENUINE OILS: For lubrication of the machine, For lubric according to the ambient tempe ALWAYS USE CLEAN WASHER FLUID: Use auto mobile window washer fluid, and be careful no t to let any dirt get CLEAN OIL AND GREASE:

Use clean oil and grease. Also, keep the containers of t he oil and grease c lean. Keep foreign materials a way from oil and gre ase. CHECKING FOREIGN MATERIALS IN DRAINED OIL: After oil is changed or filters are r eplaced, check the old o il and filters for met al particles and for eign materia ls. If l arge quantity o f metal particles or foreign materials are found, always report to the person in charge, and carry out ction. harge, carry suitable a FUEL STR AINER: Do not re move the strainer from the filler port when add WELDING INSTRUCTIONS: Cut off power.

Wait for approxi mately1 minute after tu rning off the engine starting switch key , and then di sconnect the neg ative (-) terminal of th e battery. V continuously. hin 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near the instruments may malfunction. Do not apply more than 200 Connec t grounding cable wit hin 1 m (3.3 instrum ents, connectors, etc., the instruments may m alfunction. If a sea l or bearing happens t o come between the pa rt being welded and grounding point, change the g rounding point to avoid such parts. he work equipment pins or the hydraulic cylinders as the grounding point.

Do not use the area around t he work equipment pins or the hydraulic c ylinders as the gro unding point DO NOT DROP THINGS INSIDE M ACHINE: When o pening inspection win dows or the oil filler po rt of the tank to car ry out inspection, be careful n ot to drop nuts, bo If such t lead to lts, or tools inside the machine. hings are dropped ins ide the machine, it may cause damage an d/or malfunction of the machine , an d will failure. If you drop an ything inside the machi ne, always remove it immediately. r inspection. Do not put unnecessary thing s in your pockets. Car ry only things whic h are necessary fo r inspection.