Komatsu — GUIDE TO MAINTENANCE

. MAINTENANCE GUIDE TO MAINTENANCE into the oil. LOCKING THE INSPECTION COVER: 4 - 3 DUSTY WORK When working at dusty worksites, do Inspect the dust indicator frequently to see if the air c leaner is dirty or clog Clean the ra diator core frequently t Clean and r eplace the fuel filter freq Clean electr ical components, espec ially the starting motor and alternator, t o avoid accumulation of d When inspe cting or changing the oi l, move the machi ne to a place that is fr ee of dust to prevent dirt fr om getting AVOID MIXING OILS: If a different br and or grade of oil has to be added, drain t he old oil and replace all the oil with the new bran d or grade of oil.

Never m ix different brand or gra de of oil. PRECAUTIONS FOR OPENING AND CLOSING ENGINE SIDE COVER: When standing on track to open the engine side cover, adopt a standing position, hold the side cover with both thumbs, and open it slowly with your other fingers. Fully close or open the engine side cover until it is locked and then open or close the cab door.

When stand ing on track to open the engine side cove standing po open it slow Fully close sition, hold the side co ly with your other finger or open the engine side Lock inspectio inspection cov er not locked in position , there is a dange r that it may be sudde nly blow shut by the wind and cause injury to the w HYDRAULIC SYSTEM-AIR BLEEDING: After repairing or replacing hydraulic e quipment or after removing the hydraul ic piping, it is necessary to bleed the air from the cir cuit. For details, see "P ROCEDURE FOR BLEEDING AIR IN H YDRAULIC SYSTEM (PA GE 4-44)". PRECAUTIONS WHEN INSTALLING HYDRAULIC HOSES When remo ving parts at locations new parts.

replace with When doing this, be careful not to f orget to assemble the O-rings and gas When instal ling the hoses, do not t wist them or bend them sharply. If they are installed so, their serv ice life will be shortene d extremely and they m ay be damaged.