. MAINTENANCE SERVICE PROCEDURE SERVICE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING NOTICE 4 - 20 If in spection, clean ing, or maintenance is carried out with the engine r unning, dirt will get into th e engine and damage it . Be e to stop the en gine before carrying ou t these op erations. If c ompressed air i s used, ther e is danger that dirt m ay be blo wn around and cause serious injury ays use protec tive glasses , dust mask , and other protecti ve equipment. Wh en pulling out t he cleaner el ement at a high place or a bad f oothold, take care not fall after the e lement comes off suddenly.
CHEC KING If the yellow piston in the dust indicator (1) overlaps the red zone Alway zone o s wait for the yellow piston in the dust indicator to overlap the red n the outside before cleaning the element. If the indicat unable element is clea or overlaps th to display its e poor. ned frequently before the yellow piston in the dust e red zone on the outside, the air cleaner will be normal performance and the cleaning effect will becom In add ition, the frequ ency of dus t stuck to t he element falling i nside the inner e lement during the cleaning operation will increas e. CLEANING OR REPLACING OUTER ELE 1. O 2. R pen the left e ngine side cover. emove 3 clips (2), then r emove co