. MAINTENANCE SERVICE PROCEDURE 4 - 38 REPLACE AIR CONDITI 1. L oosen 2 bolts (1) and ja ck bolt (2), then move compressor (3) the side. eplace the V-belt. When adjusting the directly with the bar. ighten jack bolt (2) and he deflection of the bol bolt (1) to apply tension to t t should be approximately 10 he V-belt. mm (0.4 ) when the belt is pre ompressor pulley and betwee n the finger pproximately 6 kg (58.
hen the belt is a new p art, it will stretch at first, so a djust the elt tension again witho ut fail after 2 or 3 days GREASE DOOR HINGE ) (Machine equipped with cab If the door makes a squeaki ng noise when it is opened o r closed, spray lubricant in through th e split in the hinge bushing. ce the hinge. If the bushing is worn, repla CHECK DOOR LOCK ST RIKER ) ck striker exceeds 0.5 mm (0.02 in), (Machine equipped with cab If we ar (A) of the door of lo (0.02 in), repla ce the striker. If it is use d as it is, the play will increas e and this may r esult in breakage of th e hinge or door lock.