. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING engine is stopped and may cause serious burns. Wait for the oil (4). into contact with the filter holder, then tighten a further 3/4 to 1 turn. 4 - 66 Part s and oil are a t high temperature immedi ately after the emperature to go d own before p erforming this operation. Refill capacity: 28 liters (7.40 US gal) Prepare a soc ket wrench and filter wre 1. Remove the cover (1) on the bottom o f the machine an d set a container to c atch the drained oil direc tly under the dra in plug. 2. Take the end of hose (2) out of the in spection window . 3. Loosen drain plug (P) to d rain oil.
Do it slowly so that yo u do not get splashed with draine e are excessive metal 4. Check the d particles or f distributor. omatsu 5. Install drain p 6. Open the eng ine side cover on the rig ht side of the ma chine 7. Remove bolt s (3) - 2 bolt s in total - to r emove lower sid e cover 8. Turn engine o il filter cartridge (5) to th e left with a filter wrench. 9. Clean the filte r holder, fill the new filte r cartridge with cl ean oil, 10. coat the thre with oil (or co When installi ad and packing portion o at thinly with grease), th ng the filter cartridge, br f the new filter cartridge en install. ing the packing surface