. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DAMPER CASE, ADD OIL WARNING rear of the cover so that you can easily get out of the way. insufficient, the damper may be seized. Accordingly, check, and add or the rear bottom of the machine body as follows. the machine body. 3) Lower and open the cover gradually. (A) Front of machine (B) Dangerous place before 4 - 77 The oil is at hig h temperature immediate ly after the mach ine has been operated. Wait f or the oil to cool down be fore starting the operation The undercove directly beneath r is heavy. Never try to o it.
When removing bolts( pen or close the 2), carry out the w cover when ork from the I f t he quantity of the oil in the damper replace the oil a ccording to the followin 1. Remove the 2 bolts (1) from the fron t side of the ma chine body. he cover, remove 2 bo lts (2) from the rear side of 2. Remove oil l evel plug (3) and check the oil level. Th e proper oil level is the b Tighten plug ottom edge of the plug REMARK level while the engine is stopped. Check the oil level while the engine If the machi ne is inclined, set it in a level posi oil level. checking the 3. If the oil level is below the bottom ed ge of the plug h ole, remove oil filler plug Add new oil level plug (3 (4) and add new oil.