. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 78 The oil is at high temperature immediately after th e machine has been operated. Wait for the oil to cool down before starting the operation. If there is still pre ssure remaining inside the case , the oil or plug may f ly out. Loosen the plug s lowly to release D65EX: (each o f right and left ) 24 liters (6.3 D65PX,WX: (ea ch of right and left) 27 liters (7.13US gal) 1. Stop the mach ine so that drai n plug (3) is dir ectly at the bottom. 2. Remove oil le vel plug (2) an d oil filler plu drain plugs (3) and (4), and d rain the oil. 3. After draining t he oil, install d rain plugs (3) 4.
Add oil to the s pecified level t hrough the hol e in oil filler plug (1). Check that th e oil is at the specified leve l. For details see "CHECK OIL (PAGE 4-58)".