Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECKING CHARGE PRESSURE OF NITROGEN GAS IN ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING under its own weight. The pressure in the hydraulic circuit can be released. 4 - 82 The a ccumulator is charged wi th high-pressure nitroge n gas, s o mistaken operation ma y cause an explosi on, which will le ad to seriou s injury or damage. Whe n handling the accumulator, always do as f ollows. Th e pressure in the hydrauli c circuit cannot be completely r emoved . When removing the hydraulic equ ipment, do not s tand he direction that the oil s purts out when carrying out the operation. In addition, lo osen the bolts slow ly when carryin g out operation.

Do not disassemble the acc Do not bring it near flame or Do not make holes in it or w Do not hit it, roll it, or subjec Wh en disposing of the accu mulator, the gas must be release d. Contact your Komatsu distributor to have this work carried out. FUNCTION OF ACCUMUL ATOR The a ccumulator(1) stores t he pressure in the control circuit. Even after the fo If t eq the engine is stopped, llowing actions are po he control lever is ope uipment, it is possible the control circuit can be operated, so ssible. rated in the direction to lower the work for the work equipment to go down The a ccumulator is installed to the position shown in the figure on the ri ght.