Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECKING FUNCTION OF ACCUMULATOR NOTICE 4 - 83 Replace the accumulat or ever y 2 y ears or every 4000 hours, whichever Check the n itrogen gas charge pressure a 1. Stop the machine o n firm, level ground 2. Operate the parking brake leve r to LO CK position (L). 3. Raise th e work equ ipment (blade) to t he maximum height Carry out the following pro cedure for lo wering the blade to t he ground within 15 seconds after stop ping the engine. When the eng ine is stoppe d, the pressu re inside the accumulator gradually goes down, so this inspe ction can be carried ou t only immediately after the engi ne is stopped 4.

While h olding the w ork equipment at th e highest p osition, the engi ne starting switch key t o OFF position (A). 5. Turn the engine sta rting switch key to ON position (B)